I've seen the others and there is no comparison in the craftsmanship of these compared to the others. This is the best pistol trunnion on the market. In my testing I have bent several flats by just putting the ram in the middle of the punch and pressing the flat straight in without moving the ram down the length of the punch. There is a radius at the entrance of the die which takes less pressure to make the bend. The base of this die set is made from a solid piece of steel that starts off at 17lbs and is machined to 14.5lbs. They have mag stabilizers on both rails to keep the mag from tilting and causing feed problems. In all there are at least five problems that will be fixed with these flats compared to any offered before.The rails that will come with the flats are pictured below. This will help solve two of the problems with the flats currently on the market. To use these flats you will need to have a 5mm and 7mm reamer. Be sure to buy the right rivets either from me or where other real AK rivets are sold.ĪK74 5.45x39 Receiver Flat Top Rail Bent and Trimmed He will no longer be making two different versions of rivet head size supports on these jigs. Once that's done a small c-clamp is used to set the spacing on the front rivets. On the front side of the jig there are slots for the mag catch rivet to clear. The rear is adjustable for use with receivers with original rivet spacing plus with Tapco flats. ![]() Here is a new version of the trigger guard rivet jig.
0 Comments
Leave a Reply. |